Siding too close to the ground—it’s vinyl—isn’t that “final?”

Vinyl siding---and what is it hiding?Siding materials need proper clearances between finish grade and the siding—regardless the type of siding.

This requirement is not just to prevent damage to the siding—–it serves a couple of other functions as well. Maintaining proper clearances reduces access to wood structures behind the siding by wood destroying insects or damage from water that might find its way behind the siding.

It allows for inspection of the area. In other words inspectors can see what type of foundation is there, whether flashings are there and whether insects are moving into the structure behind the siding.

It is likely that in all parts of the country there is some reason to follow these principles—-not just the wet North West—and this is reflected in the building codes.

I have had builders tell me that if the siding can’t be damaged by water, that there is no problem with bringing the siding right down to the ground. While it is possible to design a wall cladding that could get away with this approach—–as a general rule it is not a good idea, and proper clearances are required. At an inspection a while ago, I was fortunate to get perhaps the most perfect example of why the builder’s logic is not sound.

Take a look at the concrete patio in the following picture. Notice how the patio is poured right up to the house and the siding comes right down to the patio. This in vinyl siding and is in no danger of being damaged by water. However, as an inspector I can not tell what is behind this connection. Flashings? Concrete? Treated wood? Untreated wood?

The point is—-who knows?

Of course sliding my knife under the siding at the concrete I didn’t hit anything. Whoops—this is not going to be good, I thought to myself.

This next picture was taken in the crawl space. The entire rim joist was bug infested and rotted away over the whole length of the patio connection with the house.

The grey color visible in the picture is the back side of the vinyl siding.

Maintaining good clearances between finish-grade and siding materials of all kinds is crucial to preventing this kind of damage. In most cases it doesn’t make any difference whether the siding is wood, vinyl, aluminum, stucco or brick.


Home ()
  • 16 fl. oz.
  • No acid, ammonia or bleach.
  • Actually puts cleaning power into plain ol water!
  • Cleans everything washable
  • spray on & wipe off!

You might also like:

Vinyl house siding, custom decks, …
Vinyl house siding, custom decks, …
Vinyl siding my house part one
Vinyl siding my house part one


Sorry I don't have a good answer for you. When working on something like your house that has some problems it all depends on the skill and experience of the installers. I'd suggest you stop the job at least for a while and try to work something out satisfactory to both of you. It's probably to late now but when I see something like this I suggest to use vinyl siding because it hides defects on the walls much better.

Ogdensburg home rehabilitation program gears up for phase two, on schedule  —
Some homes will receive extensive and visible rehabilitation, including the installation of vinyl siding, roofing and windows. Other homes won't have an obvious exterior update but will have new furnaces or flooring put in.

Related posts:

  1. Vinyl Siding Clips
  2. Vinyl Siding Trim products
  3. Metal siding Homes Plans
  4. Metal Siding Houston TX