Bevel Lap Cedar Siding Raleigh, NC

This is a plain bevel or tapered lap siding made with a Western Red Cedar graded Select with tight knots. This grade does allow for knots, but the knots should be tight and not fall out. This bevel lap siding is made out of S1S2E, surfaced on one face and both edges and left rough on one face. It is graded for the rough face. The back side is smoother, but may have imperfections from milling. Western Red Cedar holds up very well to the exterior elements. It will hold up best if stained or painted, but can be left alone to naturally weather to a weathered-gray color.

Additional Information

1X6 (actual 11/16” thick by 5-1/2” wide) Tapered end is 3/16” to 1/4” thick
1X8 (actual 11/16” thick by 7-1/4” wide) Tapered end is 3/16” to 1/4” thick
1X10 (actual 11/16” thick by 9-1/8” wide) Tapered end is 3/16” to 1/4” thick

Discount quantity breaks are available for this siding at 150, 300, 600 and 1, 000 linear feet tiers.

Source: www.capitolcitylumber.com

CAPITOL CITY LUMBER Western Red Cedar Shingles Red Label in Contractor Packs [CAPITOL CITY LUMBER]
Home Improvement (CAPITOL CITY LUMBER)
  • Western Red Cedar Shingle
  • 18 long and 3 to 8 wide shingles
  • 3/8 to 7/16 thick on the butt end and tapers to 1/8 thickness
  • Covers 20-25 square feet with a 7 exposure of the shingle
  • This product cannot ship to P.O. box. Ships to Continential US only

You might also like:

Cedar Siding and Deck Refinishing b…
Cedar Siding and Deck Refinishing b…
Martz Wholesale Cedar Video 1/2 x …
Martz Wholesale Cedar Video 1/2 x …

Plywood board and batten siding

Just stripped cedar shingle siding off house and found 1x12 fir boards horizontal. Think I'll cross these with vertical 4x8 plywood to get shear wall benefit, and cover joints with 1/2 battens 12 or 16 inches o.c. Has anyone done this and have advice? I can get costly 5/8 plywood with shiplap and machined 8" grooves, but that seems to weaken the plywood. And textured plywood might encourage mold growth in its grooves. So I'm thinking best (and cheapest) way is smooth exterior plywood, a z-channel horiz. joint (walls are 13 ft. high), 16" o.c. battens and paint all. But will it look shacky and tacky? ALSO, specs indicate I should attach plywood with 6d nails, but I'm only going through 1/2"plywood and into full inch fir boards, and a 6d nail will project 1/2" past that--so shouldn't I...

Superior Dollhouse Miniatures Dollhouse CEDAR SIDING SHINGLES 500 PCS
Toy (Superior Dollhouse Miniatures)
  • Unless specifically noted this item is 1 inch scale. Our products are created especially for miniature enthusaists and hobbyist for use in designing, decorating...
  • Our products are not toys meant for children under age of 10. Our products are items for building and decorating dollhouses, and may present choking and other hazards...

Related posts:

  1. Natural Cedar Siding
  2. Clear Cedar Bevel Siding
  3. Western Red Cedar Siding
  4. Rabbeted Bevel Cedar Siding

  • Avatar Uditha What is Metallic Color(colour) ?
    Oct 04, 2009 by Uditha | Posted in Other - Cars & Transportation

    I mean new car has been painted in this colors. And how does this change from regular colors?

    • Metallic paint has small metal flakes mixed in with the paint, that shimmers slightly and shows the curves of the car better than flat paint. The down sides are that it had to be lacquered over to get the deep glossy fin …paint, which is basically just like normal metallic paint but the flakes of (normally aluminium) are a lot bigger and provide an expensive and very different finish. Click on my link below for a sample image from Google.